Hiwin SCARA Robot RS405-LU, User Manual

Page: 30 / 125

C21UE001-2008
29
is necessary to use it in a place that does not meet the above conditions, please
contact our company or dealer.
The ambient temperature is only applicable to the robot arm.
The surface of the robot arm has general oil resistance. If it is possible to
contaminate the special oil, you need to confirm it in advance. Please contact
our company or dealer.
If the temperature and humidity change greatly, the inside of the robot may
condense and cause damage.
For use in food-related applications, check the robot arm for food
contamination. Contact our company or dealer.
Do not use in corrosive environments such as acids and alkalis.
Use in environments that are prone to rust such as salt, which may cause rusting
of components.
1.5.2. Operating Environment of Controller
The design of this product is based on the use of indoor environment. If it does
not meet the requirements of the operating environment, it may cause the product
life to be shortened or even cause safety problems.
Before using the controller, confirm that the operating environment meets the
relevant requirements to maintain the stability and service life of the controller.
RC4 controller does not meet the clean room environment, and additional
equipment is required to meet the clean room environment.
Environment conditions Operating environment
Controller RC4
Ambient temperature
5
℃
~ 45
℃
[Note1]
Environment humidity 20%~75% R.H. (No condensation)
Installation method Horizontal
、
Vertical
Input power Single phase 50/60Hz 200~240VAC
Allowable height altitude 1,000m below [Note2]
Allow vibration 0.5G(4.9m/s
2
) below
other
Do not contaminate flammable or corrosive
solvents or gases.
Install indoors to avoid direct sunlight.