HiTi Digital CS-200e, Service Manual

Page: 11 / 84

Confidential 11
2-7. Encoding modules
•
Smart IC contact module
Embedded Ez100 card reader was manufactured in the beginning of every Hi-Ti card printers that helps you to
access the Contact Smart IC card R/W function in merely one feed-in. The
users could work to access the encoding functions only with “Card Desiree
CS” later than 1.0.16.20, if they have no need to write their own program.
Others will need to contact our sales specialist for the Software
Development Kit (SDK) to modify their own program.
•
Magnetic Strip encoding module
Magnetic Strip encoding module could R/W from 300 Oe to 2750 Oe that range from the low coercivity to high
coercivity. Corecivity means the necessary force obtained in order to
reduce an original magnetic field. Means, Low coercivity means the
requested out force is less than the High Coercivity material on purpose
of
eliminate the magnetization. In other words, High Co material is always
concerned as a hard or permanent magnet. The users could work to
access the encoding functions only with “Card Desiree CS” latter than
1.0.28.38.
•
Contactless Smart card encoding module
(Contactless Smart card) MIFARE is a 13.56MHz (High Frequency)
contactless technology with type A and Type B. HiTi supports Type A
base on ISO14443. Furthermore, Type A is used more commonly than
Type B nowadays. Same way, the users could work to access the
encoding functions only with “Card Desiree CS” latter than 1.0.28.38, if
they have no need to write their own program. Others will need to contact
our sales specialist for the Software Development Kit (SDK) to modify their own program.