Confidential
64
5-2 Cam Position
There is a hole for each alignment of cam position on both sides.
A pin can go through from the chassis to the cams. You have to use two pins to plug through to
ensure the correct cam alignments following the procedure as shown below:
Video of how to do the alignment of CS200e is available in the Distributor
Information System:
http://edis.hiti.com/DISUpload/Upload/distributor/technicalupdate/cs200e_cam.avi
Summary of Contents for CS-200e
