HiTi Digital CS-200e, Service Manual

Page: 5 / 84

Confidential 5
Chapter 1. Introduction
Model Name CS-200e
Print Method Color dye sublimation/ Monochrome Thermal Transfer
Resolution 300dpi x 300dpi , 256 levels per color
Display LCD control panel with multi-language
Memory
64MB, (32mbx2)
Print Speed (YMCKO, 5 passes) < 21 sec
Print Area CR-80 edge-to-edge 86 mm(L) x 54 mm(W) / 3.375"(L) x 2.125"(W)
Accepted card Specification
Sizes: CR-80 edge-to-edge 86 mm(L) x 54 mm(W) / 3.375"(L) x 2.125"(W)
Thickness: 0.3 mm to 1.0 mm ( 10 mil to 40 mil ) 0.3 is limited to single side only
Input hopper card capacity Standard: 100 cards (.0.76 mm / 30 mil thickness); 400 cards with an optional module
Output hopper card capacity 50 cards (.0.76 mm / 30 mil thickness)
Software driver Windows 2000 / XP /Vista (32bit) / 7 (32 & 64bit) / Mac 10.2 and above
Communication Interface USB 1.1/ USB 2.0 full speed / High speed
System request
Windows 2000/XP/Windows 7/Windows 8, Pentium® class 1.2GHz
CPU (or equivalent) with 512 MB of RAM or higher.
Minimum 300MB of free hard disk space
Ribbon Options
YMCKO (400 prints)
Resin K (1,000 prints)
YMCKO with half panel (560 prints)
KO (500 prints)
YMCKOK (170 prints)
Dimensions
275mm(W)/ 508mm(L)/ 251mm(H)
10.83(W)x 20(L)x 9.88(H)
Weight
4.6 kg (for base model), 6Kg(Optional modules added)
Supply Voltage Universal power supply, 100-240v, 50-60Hz (Auto switch) (External)
Operating Temperature 15° to 32° C / 59° to 89.6° F /
Operating Humidity 20 - 75% non-condensing
Accessory Options
Ethernet connection: field upgradable module (Option)
Contact Chip: field upgradable module, encoding/decoding with SDK (supports ISO
7816 T=0, T=1 smart card & common used memory cards)
ISO Magnetic Strip: field upgradable module, encoding/decoding, HiCo/LoCo (HiCo up
to 4000) with SDK
Contact-less (RF): field upgradable module, encoding/decoding with SDK (Mifare ISO
14443 Type A/B available)
Flipper Module: field upgradable module
Power Consumption <10 W for sleep mode, <180 W for full load mode.
Specification: