Hitecsa ADISA ADI CD 105, Technical Manual Of Installation, Use And Maintenance

Page: 36 / 69

ADI CD Boiler – Technical Manual
36
13.1. Heating circuits basic parameters
Activation of heating circuits
Heating circuits are deactivated in default parametrization (heat demand of the boiler is given by the parameter
1859 “Flow temp setp cons request”). Adjust the following parameters to enable the heating circuits and to
assign the extension modules to each heating circuit.
13.2. Professional installator parameters
Operating mode
The operating modes of the heating circuits are selected directly in the
temperature page.
This setting is used to switch between different operating modes which are:
Automatic
•
The living zone is operated as per the time switch program
•
Automatic energy savings functions (e.g. summer/winter mode)
•
Temporarily 'warmer' or 'cooler' allows the user to temporarily adjust the temperature for special situations
•
Adjust comfort setpoint
•
Protective functions active
Protection
•
The living zone remains protected (frost protection, protection against heat accumulation)
•
The living zone is switch off
•
Protective functions active
•
Automatic summer/winter changeover (ECO functions) and automatic 24-hour heating limit active
Reduced
•
The living zone is operated continuously at a reduced setpoint
•
Protective functions active
•
Automatic summer/winter changeover (ECO functions) and automatic 24-hour heating limit active
Comfort
•
The living zone is operated continuously at the comfort setpoint
•
Protective functions active
•
Automatic summer/winter changeover (ECO functions) and automatic 24-hour heating limit active
Heating curve slope
The heating curve generates the flow temperature setpoint, which is used to maintain a certain flow temperature
level depending on the prevailing weather conditions.