Hitecsa ADISA ADI CD 105, Technical Manual Of Installation, Use And Maintenance

Page: 22 / 69

ADI CD Boiler – Technical Manual
22
Setting of Language
On the navigation bar, turn the control knob until “ Service/setting pages” is preselected. Press the
control knob to enter to the pages. The title “ Regional settings (1/3) ” is preselected. Press the control
knob and text is selected.
Turn control knob until the title “
Regional settings (3/3) “ is preselected. Press the control knob to enter to the
page. Turn the control knob until parameter “
Language
” is preselected. Press the control knob and text is
selected. Turn the control knob and choose the new language. Press the control knob to confirm the setting.
Press the control knob for 3 seconds to exit. The start page opens.
10.3 Boiler lockout code
Pending errors are indicated on the status bar by an alarm symbol ( ). Go to the Info pages for additional
information on pending errors.
High-priority error messages (dependent on controller) are displayed in front. Operator interventions remain
possible in this case. The display automatically switched to error display after a lock timeout of 1 minute.
A maximum of 2 Info pages with errors are displayed: The title of the Info page of an error is "Error" or "Error 2"
accordingly.
Error messages have the following structure: "Error number:Error text". The error text is normally plain text.
Non-interactive errors disappear automatically from the display after troubleshooting (e.g. outside temperature
sensor missing).
For interactive sensors, the user must troubleshoot and then reset the sensor
The error messages are visualized in the info pages. To enter the info pages, proceed as follows:
On the navigation bar, turn the control knob until “ Info pages ” ( ) is preselected, press the control knob
to enter to the page. The title of the Info page is selected and is displayed inverted. Turn the control knob
to the right until the first plant page is displayed. Continue to turn the control knob to go to other plant
pages. Press the control knob to preselect the title of a plant page.