Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 40/81
The two latest measurements can be shown by pushing the
button. The graph of this
test is shown and the application switches to the retrieve modus.
All the TLS measurements are logged. This gives the user the possibility to visualize a TLS
measurement
. This can be done by pushing the
Trend
button. See the TLS Trend
section to get more information about it.
If a bad measure was accepted by mistaken, the user has the possibility to delete it by
clicking on the “
Undo last TLS
” button and the last will be removed from the list.
70% mode
The following window will appear by choosing the TLS menu. See also section TLS
Measurement to get more information about the principle of the TLS measurement.
With this window it is basically possible to make TLS measurement, or to view the latest
measurements which have been made.
Figure 8
– TLS in 70% mode
The following information is provided on this window:
Chamber
The chamber used to do the TLS measurement.
First measure
The first measure taken for the calculation of the TLS.
Second measure
The second measure taken for the calculation of the TLS. This is
actually the last measure which has been done and accepted.
Average
The average of the two last TLS measurements, which gives the TLS
value.
Weight
The weight which will be used for the next TLS measurement.
The
TLS measurement
is set by pushing either the
Test
button or the
Enter
button on the
DADS terminal. The TLS test is done like all other tests. See the section How to do a test? to
get more information about the different possibilities.
