Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 20/81
Connect the hoses as shown in Figure 3.
Replace the titration hose by the filling hose, and set the hose delivered in place of the filling
hose. Carefully finger tight the screw connectors. Be sure that there is no kink in the hoses.
Figure 3
– Connecting Burette Hoses
We do this exchange, because the outlet hose is too short to insert in the
Oil debit tube and
move in and out
the tip holder
of its position when testing.
This exchange is only done for the SCHOTT burettes.
Filling
hose
Titration
hose
