Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 28/81
During the use of the DADS application, this one switches between different
states
.
Idle state
The application waits for the user action. Either on the DADS terminal
(keys), the base unit (motor start) or on the application itself (buttons).
Cleaning state
On the Absorptometer H type, in case the terminal is in the Idle mode and
the user starts the motor by pressing the Green Enter button the cleaning
mode starts. The motor is running during a certain period. See on Menu /
Cleaning to know how to adjust time.
Retrieve state
A measurement is shown. This happens after a test or if the user chosen
the retrieve function. A new selection can be made with the cursors, and
the polynomial can be recalculated and printed out. All maintenance
menu functions are inhibited.
Test state
A measurement is running and the terminal only accepts some restricted
actions, like shown on
Error! Reference source not found.
the
Properties
button) and stop test.
Go to the How to do a test? section for more information on how to make a measurement.
Parameters Section
The Parameters section provides information about the test configuration. The following
information is provided.
Example of test group selection list:
Test group
In the quality editor and in the Test List editor the user has the possibility
to create groups of tests. With the test group combo box he can select the
group of tests he wants to work with on the current machine. He can
either work with a group of tests from defined by the quality editor, or with
a group of tests defined by the
. See also the example
above.
He can scroll then through the tests of the test group by using the
scrollbar on the DADS application or the UP and DOWN keys of the
DADS Terminal. In case the user selects "Test List / All" as test group, all
the defined tests in the test list are displayed.
