Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 33/81
Application Control Section
On the bottom right part of the application the user can
start other HITEC applications
, in
case they are installed. This would be the case for instance if two DADS machines would be
connected to one single PC, on different COM ports. On the example below two DADS
applications are installed, called DADS 1 and DADS 2.
The
Retrieve
application is used only to retrieve and evaluate existing measurements.
With the buttons the user can also switch from one application to the other one.
Menus Description
Menu File
Print Setup
This menu allows changing some print settings.
Printer
The user can choose the printer the printouts have to go to. A list with
the installed printers on the system is shown.
Language
The language in which the printouts are done. One can choose a
different language for printouts than for the normal application language.
This allows a user to printout reports in English, French or in German.
Print Polynome
This option allows you to print only a part of the complete curve (part
where the polynomial is calculated).
Print complete
curve
This option allows you to print the curve from the beginning.
See also the menu Print section to get some more information about printing.
