Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 42/81
Trend
All TLS measurements are logged. This list of measurement, called Trend, can be shown by
pushing the
Trend
button of the TLS measurement window. A
list
like follows is shown.
The TLS measurement result (not the TLS value) and the maximum torque during the test is
shown. The Status column shows if th
e measure was “Accepted” or “Rejected”.
A
graph
can be shown too by pushing the
Graph
button. The graph would look like the next
one.
Figure 10
– TLS Trend Graph
