DRIVING THE MACHINE
4-6
Travel Mode Switch (ZX26U-5A)
d
WARNING: Tipping-over accidents can cause serious
personal injury. Do not change travel mode switch
(1) while traveling; especially, changing to fast mode
when descending slopes will create a very dangerous
situation. Always stop the machine before changing
the travel speed mode.
When travel mode switch (1) is pushed while the machine is
traveling at slow speed, the travel speed becomes high. Travel
mode switch (1) is lit.
When travel mode switch (1) is pushed while the machine is
traveling at high speed, the travel speed becomes slow. Travel
mode switch (1) turns OFF.
f
NOTE: At low temperature, when the machine is traveling
with travel mode switch (1) in the fast travel mode position,
the slow travel mode may not automatically be selected even
if the traveling loads increase. This symptom is not abnormal.
Drive the machine after conducting sufficient warm-up
operation.
The slow travel mode will automatically be selected if the
traveling loads increase.
The operation state of travel mode switch (1) is kept until next
operation. When the engine is stopped at high speed state,
the engine starts at high speed next time.
MABA-04-003
1
Summary of Contents for Zaxis 17U-5A
