Hitachi Zaxis 17U-5A, Operator'S Manual

Page: 80 / 278

OPERATOR'S STATION
1-14
Opening Upper Front Window (ZX26U-5A) (Cab
equipped machine)
Front Window
1. Hold handles (1) at upper part of the front door and pull
lock levers (2) with your finger. Release the lock to open
the front window.
2. Pull the upper front window up and back along the rail
until it securely activates lock levers (2) at the rear end.
This time, use handle (3) on the lower front window.
3. After confirming that lock levers (2) are securely
activated, slide lock pin (6) to lock the window in
position.
d
CAUTION:

Slowly close the upper front window so as not to
catch a finger.

Switch (4) is provided on the front window to
prevent the wiper from operating when the front
window is opened. Before closing the front window,
ensure that the wiper switch is turned OFF.

When opening the front window, ensure that the left
and right locks are definitely activated.
4. Close the upper front window by following steps 1 and 2
in the reverse order.
Removing and Storing Lower Front Window
1. Open the upper front window beforehand when
removing the lower front window. Pulling lower front
window (5) upward along the window frame will release
the window towards the cabin side. Install the lower
front window by following the steps in the reverse order.
d
CAUTION: Lower window (5) breaks easily by drop
or shock, so carefully place and keep the removed
windowpane in the safe storage area.
MADB-01-058
1
2
3
4
MADB-01-059
3
1
MADB-01-060
5
6