1-2
●
Delivered goods
No.
Part Name
Qty Product code
Remarks
13 Cable seal
3
-
Seal for power cable and
external communications cable.
14 Cable clip
1
-
15 Plastic bag with zipper
1
-
16 Drainage tube
1
-
Used when replacing ink and
filter.
(If using a beaker instead of the
waste solution bottle)
17 Signal tower holder
1
-
Used for attaching the signal
tower.
18 Signal tower holder plate
1
-
19 Ferrite core
1
-
Attach to LAN cable when using
TUP-I.
Install by wrapping the cable 1
turn as shown in the figure below.
20
(*1)
Nozzle rubber seal
1
-
This part is used when IJ Printer is
shutdown for several days, or
pursuant to “6.16.1 Process prior
to long-term shutdown” in
Technical Manual. This parts is
mounted on the print head when
the product is delivered.
21
(*1)
Supply port cap
2
-
This part is used when IJ Printer is
shutdown pursuant to “6.16.1
Process prior to long-term
shutdown” in Technical Manual.
This parts is mounted on the Ink or
Makeup reservoir when the
product is delivered.
Cable clip
Nozzle rubber seal
One page sheet
Use to store the one page
sheet and nozzle rubber seal.
Note “Part Name” and “Product code” when ordering the parts.
(*1) Store these parts in a plastic bag, etc., to protect it form dirt and dust.
Signal tower
Holder plate
(Packing)
Holder
To TUP-I
