●
Replenishing the ink 8-2
8.1 Replenishing the ink
(1) Overview
●
Ink can be refilled when the remaining ink icon is at the position which indicates that the cartridge bottle
can be replaced.
●
Replenish the ink in the ink reservoir within 60 minutes after an Ink Low warning is generated. If the ink is
not replenished, the printer will stop.
●
When the ink is replenished, the warning is automatically reset.
●
Ink can only be refilled while the power is ON.
Remove the over cap of an ink cartridge bottle.
The over cap is a cap that is necessary at storage.
It is unnecessary at ink refill.
1
Ink cap
●
Do not grip the over cap and lift the cartridge bottle.
The cartridge bottle could be dropped.
●
Since an IC chip is built into the cartridge bottle, avoid strong shock and
electromagnetic waves and liquid wetting.
CAUTION
Over cap
Ink cartridge bottle
●
When the ink cap was loosened, set it after tightening firmly.
Otherwise the ink may spill when setting the cartridge bottle.
●
After removing the over cap, do not allow your finger, foreign matter or dirt to
get into the hole of the ink cap. Doing so could cause ink leakage and
equipment failure.
●
Do not change the ink cap of the ink cartridge bottle or makeup cap of the
makeup cartridge bottle. Ink or makeup could spill.
CAUTION
[NOTE] If the color of icon is "Green", the ink cartridge bottle can't be replaced.
●
If the ink cartridge bottle with reduced content is set in the printer, the level of the Remaining Ink Icon
displayed on the screen may suddenly drop to the Replaceable Ink level. However, this is not a failure and
the printer operation can be continued.
(2) Operation
Full
Empty
<Remaining Ink Icon>
Replaceable Ink level
