manualshive.com logo in svg

Hitachi UX, Basic Operation Manual, Page: 28 / 88

Share
Download
Hitachi UX Basic Operation Manual Download Page 28

4-2 

●

Installing Precautions 

Upward printing

Lateral printing

Downward printing

Print head 
cable included

1m

1.5m

Print head

Print head cable

Main body installation surface

IJ printer 
main body

Upward 
printing

Lateral 
printing

Downward 
printing

Print head 
cable included

1m

1.5m

Print head

Print head cable

Main body installation surface

IJ printer 
main body

(9) When installing the print head and print head cable, comply with the following conditions or it will 

increase the risk of degraded performance of the ink supply and ink recovery behavior.

  a) 0 to 45

℃

When positioning the end of the print head above the printer main body installation surface,ensure 
that the distance between the end of the print head and the installation surface does not exceed 1.5 m.
When positioning the end of the print head below the printer main body installation surface, ensure 
that the distance between the end of the print head and the installation surface does not exceed 1 m.

2

1

  b) 45 to 50

℃

When positioning the end of the print head above the printer main body installation surface,ensure 
that the distance between the end of the print head and the installation surface does not exceed 1.5 m.
Do not install the end of the print head lower than the body mounting surface.

2

1

Summary of Contents for UX

























































































Reviews:

No comments