manualshive.com logo in svg

Hitachi UX, Basic Operation Manual, Page: 13 / 88

Share
Download
Hitachi UX Basic Operation Manual Download Page 13

●

Delivered goods 1-1

No.

Part Name

Qty Product code.

Remarks

1 IJ printer body

1

-

2 Basic Operation manual

1

-

3 Manual  CD

1

-

The instruction manual and 
technical manual are provided.
Be sure to read the manuals 
thoroughly and get a good 
understanding so you can use the 
printer correctly.

4 One-page sheet

1

-

5 Magnifying glass

1

451274

Used in ink particles shape check, 
ink beam position check, etc.

6 Tweezers

1

451412

Used when removing the 
orifice, etc.

7 Cleaning bottle

1

451058

Filled with makeup and used in 
print head cleaning, etc.

8 Beaker with handle

1

451410

Used in print head cleaning, ink 
replacement, etc.

9 Waste solution bottle

1

-

Used when replacing ink and 
filter.

10 Wiping paper

1

-

Use for wiping after print head 
cleaning, etc.

11 Mini Filter

1

451857

Recovery filter, Makeup filter
(Spare parts)

12 O-ring SF7000-5.6

1

451589

An O ring for the orifice plate seal 
(spare part).

1. DELIVERED GOODS

●

Unpack the equipment and check the delivered goods.

φ

7.2

Summary of Contents for UX

























































































Reviews:

No comments