4-71
●
Set the print specifications
Print specifications
2015.07.07 12:45
Com=0
[Stop
]
Change unit
format
Edit
message
Message name [
]
Ink drop use
Character width
（
1/1
〜1/
16
）
（
0
〜
3999
）
Character height
（
0
〜
99
）
８５
０３
００００
Character
orientation
Printing method
１（１：
Single scan
２：
Interlaced
３：
Mixed
）
Print start
delay
Arrow : Prin-
ting direction
００００
Print start delay
（
0
〜
9999
）
SC
Sensor
Print start
0:
ＡＢＣ
→
1:
ＡＢＣ
←
←
→
ＡＢＣ
2:
ＡＢＣ
3:
M
Manual
Startup
HOME
Back
1st screen
2nd screen
3rd screen
4.14 Set the print specifications
4.14.1 Set the character height, character width, and orientation
(1) Function
●
Sets the character height, character width, character orientation, and print start.
Character height
●
The character height can be specified.
1
3
Ink drop use percentage setting
Character width setting
1/1
002
1/2
001
1/3 to 1/16
000
●
For rotary encoder wiring and setup, see the Technical Manual “4.3.2-1 Rotary encoder
specifications, wiring and switch setting”.
Ink drop use percentage
●
Sets the ratio of drops used in printing. For example, ink drop use 1/3 prints at a ratio of 1 in 3 ink
drops. The 2 ink drops are recovered from the gutter.
2
Setting range of ink drop use percentage
Model type
1 line
2 lines
3 lines
Notes
RX2-B
1/3 to 1/16
1/4 to 1/16
1/4 to 1/16
-
RX2-S
1/2 to 1/16
1/2 to 1/16
1/2 to 1/16
Option : Up to 1/1
●
When ink drop use is 1/1, high speed printing is possible. For ink drop use 1/16, low speed printing is
performed and the print quality improves.
●
When Format setup is Free layout on the Change message screen, setting range of ink drop use
percentage is 1/2 to 1/16.
Character width
●
The character width can be specified.
●
The character width setting range is from 0 to 3999.
●
When the product speed matching feature is incorporated (when the rotary encoder is connected),
set the character width as indicated below.
Changes the print start
delay input units.
Screen
switching
