Hitachi IR.LINK, User Manual

Page: 35 / 103

3 MOUNTING AND WIRING
3-2
3.1 Mount Base
This module can be mounted on the mount bases shown in Table 3-1.
Table 3-1 Mount Bases Applicable to the IR.LINK Module
Series Name Model Specifications
S10mini
2-slot mount base HSC-1020 Power CPU + 2 slots (optional, for I/O)
4-slot mount base HSC-1040 Power CPU + 4 slots (optional, for I/O)
8-slot mount base HSC-1080 Power CPU + 8 slots (optional, for I/O)
S10V
4-slot mount base HSC-1540 Power LPU + 4 slots (optional, for I/O)
8-slot mount base HSC-1580 Power LPU + 8 slots (optional, for I/O)
3.2 Mounting the Module
Mount the optional module in an option slot (slot numbered between 0 and 7) in the mount base
as shown below:
NOTICE
z Only one IR.LINK module can be installed.
z
For the S10mini series, install option modules from the leftmost slot so that the
I/O module may not exist between the CPU module and an option module and
any empty slot may not exist between the option modules.
z For the S10V series, there is no constraint on the mounting position and empty
slot.
z
When installing the J.NET or J.NET-INT module and the IR.LINK module
simultaneously, install the IR.LINK module as the sub-setting. When
installing only the IR.LINK module, install it as the main setting.
Figure 3-1 Mounting the Optional Module
Mount base Option slots
Power supply
module CPU or LPU
module
Optional module
0 1 2 3 4 5 6 7