Hitachi IR.LINK, User Manual, Page: 45 / 103

4 OPERATION
4-2
4.1 Information for Starting Up the System
Use the IR.LINK system as a tool for starting and setting the IR.LINK module.
The IR.LINK system is a man-machine tool that sets the information required for communication
between the IR.LINK module and the IR.Station module.
4.1.1 System configuration
Figure 4-1 System Configuration
NOTICE
z
Only one IR.LINK module can be installed.
z For the S10mini series, install option modules from the leftmost slot so that the
I/O module may not exist between the CPU module and an option module and
any empty slot may not exist between the option modules.
z For the S10V series, there is no constraint on the mounting position and empty
slot.
z
When installing the J.NET module (model: LQE040 or LQE540) or J.NET-INT
module (model: LQE045 or LQE545) and the IR.LINK module simultaneously,
install the IR.LINK module as the sub-setting. When installing only the
IR.LINK module, install it as the main setting.
S10V LPU unit or
S10mini CPU unit
IR.LINK module (main)
IR.Station module
8-slot I/O unit
No. Module
0 Main module
1 Sub-module
LQE546
IR.LINK
N1
TX
RX
ERR
MODU
No.
BIT
RATE