Hitachi IR.LINK, User Manual

Page: 18 / 103

i
PREFACE
Thank you for purchasing the IR.LINK module, which is an option for use with the S10mini/S10V.
This manual, named USER’S MANUAL OPTION IR.LINK, describes how to use the IR.LINK
module. For proper use of the IR.LINK module, it is requested that you thoroughly read this
manual.
This S10mini and S10V products are available in two types: standard model and environmentally
resistant model. The environmentally resistant model has thicker platings and coatings than those
for the standard model.
The model number of the environmentally resistant model is marked by adding the suffix
“
-Z
”
to
the model number of the standard model.
(Example) Standard model: LQE546
Environmentally resistant model: LQE546-Z
This manual is applicable to both the standard model and environmentally resistant models.
Although the descriptions contained in this manual are based on the standard model, follow the
instructions set forth in this manual for proper use of the product even if you use the
environmentally resistant model.
When mounting S10V, IR.LINK module (model: LQE546) before Module Rev.B (Ver-Rev: 0002-
0001) doesn’t provide for application task start function by interrupt I/O input, but provides for I/O
communication function with IR.Station only. When utilizing the application task start function
performed by interrupt I/O input in combination with S10V, you should use the module after
Module Rev.C (Ver-Rev: 0003-0000).
Moreover, the above-mentioned Ver-Rev is a microprogram Ver-Rev of IR.LINK module which is
shown on “Module List” of S10V BASE SYSTEM.
<Trademarks>
Microsoft® Windows® operating system, Microsoft® Windows® 2000 operating system,
Microsoft® Windows® XP operating system, Microsoft® Windows® 7 (32-bit) operating system
are registered trademarks of Microsoft Corporation in the United States and/or other countries.