Hitachi IR.LINK, User Manual

Page: 52 / 103

4 OPERATION
4-9
(4) For Ethernet communication, click the “Ethernet” radio button and then enter the connection
destination “IP address.” (See Figure 4-6.)
Figure 4-6 Ethernet Connection
(5) After completion of setup, click the OK button. To abort the setup process, click the
Cancel button.
NOTICE
z The S10mini Series does not support GP-IB. Do not select “GPIB” on the
communication type selection window.
z The S10V Series does not support GP-IB. “GPIB” is not displayed on the
communication type selection window.
4.2.5 Closing the system
In the [IR.LINK SYSTEM] window (see Figure 4-2) or [ [S10V] IR.LINK SYSTEM] window
(see Figure 4-3), click the
×
button or Close button.