Hitachi IC25N010ATCS04, Specifications

Page: 38 / 217

6.2 DC power requirements
Connection to the product should be made in a safety extra low voltage (SELV) circuits. The voltage
specifications are applied at the power connector of the drive.
7–100 ms Supply rise time
±5%
Tolerance
2
100 mV p-p max.
Power supply ripple (0–20 MHz)
1
–0.3 Volt to 6.0 Volt Supply voltage
+5 Volt dc Nominal supply
Requirements Item
3.3 3.3 3.8 Average from power on to ready
4.7 4.7 5.0
Startup (maximum peak)
6
0.1 0.1 0.1 Sleep
0.25 0.25 0.25 Standby
2.3 2.3 2.6
Seek average
5
2.1 2.2 2.7 Write average
2.0 2.1 2.5
Read average
4
0.65 0.65 0.9 Low Power Idle average
0.85 0.95 1.3 Active Idle average
1.85 1.85 2.0
Performance Idle average
3
20GB, 10 GB 40GB, 30 GB 60 GB
Models Watts (RMS Typical)
Footnotes:
1
The maximum fixed disk ripple is measured at the 5 volt input of the drive.
2
The disk drive shall not incur damage for an over voltage condition of +25% (maximum duration of
20 ms) on the 5 volt nominal supply.
3
The idle current is specified at an inner track.
4
The read/write current is specified based on three operations of 63 sector read/write per 100 ms.
5
The seek average current is specified based on three operations per 100 ms.
6
The worst case operating current includes motor surge.
Figure 20. DC Power requirements
Hitachi Travelstar 60GH & 40GN hard disk drive specifications
25