manualshive.com logo in svg

Hitachi IC25N010ATCS04, Specifications

The Hitachi IC25N010ATCS04 is a high-performance hard drive, known for its reliability and storage capacity. With our website, you can easily access the user manual for this product, available for free download. Get all the necessary specifications and find step-by-step instructions on manualshive.com, ensuring a seamless user experience.

Share
Download
background image

Table of contents

28

6.4.4 Service life and usage condition

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.4.3 Cable noise interference

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.4.2 Failure prediction (S.M.A.R.T.)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.4.1 Data reliability

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.4 Reliability

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

6.3 Start up Current

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

6.2.1 Power consumption efficiency

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

6.2 DC power requirements

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

6.1.4 Magnetic fields

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

6.1.3 Conductive noise

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

6.1.2 Radiation noise

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

6.1.1 Temperature and humidity

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

6.1 Environment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

6.0 Specification

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

5.8 ECC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.7.3 Recovered read errors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.7.2 Nonrecoverable read error

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.7.1 Nonrecovered write errors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.7 Automatic reallocation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.6 Error recovery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.5 Data buffer test

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

5.4 WRITE safety

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

5.3 Equipment status

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

5.2 Write Cache

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

5.1 Data loss on power off

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

5.0 Data integrity

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

4.4.3 Operating modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

4.4.2 Mechanical positioning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

4.4.1 Command overhead

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

4.4 Performance characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

4.3 Cylinder allocation by model number

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

4.2 Data sheet

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

4.1 Formatted capacity by model number

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

4.0 Fixed disk characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

3.2 Head disk assembly data

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

3.1 Control Electronics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

3.0 Fixed disk subsystem description

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Part 1. Functional specification

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

2.0 General features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

1.4 Drive handling precautions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

1.3 General caution

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

1.2 References

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

1.1 Abbreviations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

1.0 General

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

vii

Figures

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hitachi Travelstar 60GH & 40GN hard disk drive specifications

iii

Summary of Contents for IC25N010ATCS04


























































































































































































































Reviews:

No comments

Related manuals for IC25N010ATCS04

Feig Electronic ID ISC.LRM200-A/B Installation Instructions Manual preview
ID ISC.LRM200-A/B
Brand: Feig Electronic Pages: 20
HOMCOM B71-048 Assembly & Instruction Manual preview
B71-048
Brand: HOMCOM Pages: 33
Bull 58/87 Service Procedures preview
58/87
Brand: Bull Pages: 50
INOVU CHROME BOX 2.5 L User Manual preview
CHROME BOX 2.5 L
Brand: INOVU Pages: 30
Samsung SPINPOINT MP2 HM080HJ Specifications preview
SPINPOINT MP2 HM080HJ
Brand: Samsung Pages: 1
Samsung SPINPOINT HS120JR Specifications preview
SPINPOINT HS120JR
Brand: Samsung Pages: 1
Samsung SPINPOINT HS08XJF Specifications preview
SPINPOINT HS08XJF
Brand: Samsung Pages: 1
Samsung Spinpiont F1 SERIES Product Manual preview
Spinpiont F1 SERIES
Brand: Samsung Pages: 6
Samsung SpinPoint M9T Product Manual preview
SpinPoint M9T
Brand: Samsung Pages: 81
Samsung SpinPoint M8 Product Manual preview
SpinPoint M8
Brand: Samsung Pages: 83
Samsung Spinpoint M9TU Product Manual preview
Spinpoint M9TU
Brand: Samsung Pages: 98
Samsung SGH-Blast Series User Manual preview
SGH-Blast Series
Brand: Samsung Pages: 163
Neilsen CT1973 Instruction Booklet preview
CT1973
Brand: Neilsen Pages: 6
G-Technology G SPEED STUDIO XL Product Manual preview
G SPEED STUDIO XL
Brand: G-Technology Pages: 119
Dexxon SSD POWER PLUS X150 User Manual preview
SSD POWER PLUS X150
Brand: Dexxon Pages: 3
Sunex Monster Mobile Owner'S Manual preview
Monster Mobile
Brand: Sunex Pages: 13
SiForce LOCKBOX SLIM User Manual preview
LOCKBOX SLIM
Brand: SiForce Pages: 2
STEELSPAN STORAGE SYSTEM Module 10 Instructions Manual preview
Module 10
Brand: STEELSPAN STORAGE SYSTEM Pages: 14

Brands by name

Popular brands

Load more brands