GR4000 Installation Guide Version 1.00 - Preliminary
520-10-014-20X
197
Step 2
Insert the network interface board into the slot until it reaches the position
indicated in the figure below, and fold its levers to the indicated direction. (The network
interface board will be inserted into the slot completely.)
Figure 5.7-10
Network interface board being locked
*
NOTE: When inserting a network interface board into the slot, do it holding its levers so
that its connector part is fixed into its position correctly. When moving levers,
do it slowly without giving much pressure to them.
Step 3
Fasten the screws of the network interface board.
!
Caution: Use a driver when screwing up a packet routing unit, and make sure that it is
fixed into its position firmly.
Step 4
Attach the network interface cable to the network interface board. (As for the
attachment of an interface cable, refer to the section 4.10 Connecting Interface Cables
to the GR4000.)
Lever
Lever