Hitachi GR2000 Series, Installation Manual

Page: 121 / 410

Component Details
GR2K-GA-1002 3-19
Rev. 6.03
3.5.1 NE100-8T, NE100-8TA and NE100-8TB
The NE100-8T, NE100-8TA, and NE100-8TB physically appear as Figure 3-22. These
NIFs each have eight ports for connection with 8-pin modular connectors of RJ-45.
Table 3-16 shows the connector specifications.
Figure 3-22 NE100-8T, NE100-8TA and NE100-8TB Front Panel View
OC-48c/STM-16 (POS) NWOC48-1S Full size, 30mm wide 2 km
NWOC48-1S4 Full size, 30mm wide 40 km
NWOC48-1S8 Full size, 30mm wide 80 km
NWOC48-1A Full size, 30mm wide 2km
NWOC48-1A4 Full size, 30mm wide 40km
NWOC48-1A8 Full size, 30mm wide 80km
ATM OC-3c/STM-1 (ATM) NAOC3-1M Half size, 30mm wide MMF, 2km
OC-3c/STM-1 (ATM) NAOC3-1S Half size, 30mm wide SMF, 15km
25Mbps ATM NA25M-1 Half size, 30mm wide 90m
OC-12c/STM-4 (ATM) NAOC12-2M Full size, 30mm wide MMF, 500m
OC-12c/STM-4 (ATM) NAOC12-2S Full size, 30mm wide SMF, 15km
NAOC3-8M** Full size, 30mm wide 2km
NAOC3-8S** Full size, 30mm wide 15km
*For Japan only
** Product intended for the Japanese market handled only by Hitachi Japan.
Table 3-16 Connector Specifications for NE100-8T, NE100-8TA and NE100-8TB
Pin No. Specifications
1 Transmit (+) (TA)
2 Transmit (-) (TB)
3 Receive (+) (RA)
4 Unused (UA)
5 Unused (UB)
6 Receive (-) (RB)
7 Unused (UC)
8 Unused (UD)
Note: Because the interface cable is of twisted-pair type, make TA and TB into a pair, and make RA
and RB into another pair on 10BASE-T; the other pins can be connected to one another without
particular regard to pairing, or can be left open. On 100BASE-TX, additionally make UA and UB into a
pair, and make UC and UD into another pair to cause termination within the NIF.
Table 3-15 NIF Models (continued)
S
TA
T
U
S
NE
10
0-
8T
LNK/ACT:G
LINE ERR:Y T/R
LINE 0 LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6 LINE 7
10BASE-T/100BASE-TX
NE
1
00-
8
T
A
or