4 - 12
Disassembly and Reassembly > VCR Deck Mechanism Disassembly
Fig. 4-4-11 Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y Removal
(9) Gear Loading Drive, Slider Cam, Lever Load S, T Ass'y Removal
1) Remove the Belt Pulley.
(Refer to Fig. 4-4-28)
2) Remove the Gear Loading Drive after
releasing Hook [A] in the direction of arrow
as shown in the detailed drawing.
3) Remove the Slider Cam.
4) Remove the Lever Load S Ass'y & Lever
Load T Ass'y.
Fig. 4-4-12 Gear Loading Drive, Slider Cam, Lever Load S, T Ass'y Assembly
Assembly:
1) When reinstalling, be sure to align the dot of Lever Load T Ass'y with the dot of Lever Load S
Ass'y as shown in the drawing (Refer to Timing Point 1).
2) Insert Pins A,B,C,D into the holes in Slider
Cam.
3) Be sure to align the dot of Lever Load T and
the dot of Gear Loading Drive (Refer to
Timing Point 2).
4) Align the dot of Gear Loading drive with the
mark of Slider Cam as shown in the drawing
(Refer to Timing Point 3).
HOOK(A)
2) GEAR LOADING DRIVE
4) LEVER LOAD S ASS'Y
4) LEVER LOAD T ASS'Y
3) SLIDE CAM
LEVER LOAD S
LEVER LOAD T
PIN A
PIN C
PIN B
PIN D
SLIDER CAM
TIMING POINT 1
TIMING POINT 2
TIMING POINT 3