4 - 15
1) WASHER SLIT
2) HOLDER CLUTCH ASS`Y
DETAIL A
<BAD>
SPRING
<GOOD>
<BAD>
SPRING
<GOOD>
DETAIL B
Disassembly and Reassembly > VCR Deck Mechanism Disassembly
Fig. 4-4-17 Disk S, T Reel Removal
(14) Disk S, T Reel Removal
1) Lift the Disk S, T Reel.
Fig. 4-4-18 Holder Clutch Ass'y Removal
(15) Holder Clutch Ass'y Removal
1) Remove the Washer Slit.
2) Lift the Holder Clutch Ass'y.
Note :
When you reinstall the Holder Clutch Ass'y:
1) Check the condition of spring as shown in detail
A.
2) Don't push the Holder Clutch Ass'y down with
excessive force. Just insert Holder Clutch Ass'y
into post center with dead force and Rotate it
smoothly.
Be sure to confirm that the spring is in the slit
of Gear Center Ass'y as shown in detail B.
DISK S REEL
DISK T REEL