Hitachi CP-AW3019WN Operating Manual Download

Page: 99 / 142

Presentation tools

Interactive Function (continued)

Using “StarBoard Software”

If you are using the “StarBoard Software” for the first time, install it by following

the instructions in the manual located inside the bundled DVD-ROM.

For details on how to use the “StarBoard Software” and its functions, refer to the

bundled “StarBoard Software” DVD-ROM manual. The installation method is in

the menu of DVD which runs automatically when inserted to your computer’s drive

as follows: Browse Documents→Software, may lead you to a folder named in

different languages. Select your desired language and refer to the manual inside.

Before using this product, please read all manuals for this product.

We will not be liable for any matters related to the applications and manuals.

►Only use the DVD-ROM in a computer DVD drive. The DVD-

ROM is designed for computer use only. NEVER INSERT THE DVD-ROM

INTO A NON-COMPUTER DVD PLAYER! Inserting the DVD-ROM into an

incompatible DVD drive may produce a loud noise, which in turn MAY RESULT

IN EAR AND SPEAKER DAMAGE!

• After using DVD-ROM, please put it into DVD case and keep it. Please keep

the DVD neither in direct sunlight nor in a high temperature and high humidity

environment.

CAUTION

NOTE

• The information in the DVD-ROM is subject to change without notice.

• No responsibility is taken for any obstacle and defect to hardware and

software of your computer as a result of the use of the DVD-ROM.

• The pen is referred to as “Electronic pen” in the “StarBoard Software”.

• Notations in the “StarBoard Software” manual may differ from those in this

manual.

• Please regards the word "StarBoard" found in StarBoard Software manual,

online help, software message or any other related materials as the interactive

whiteboard system using the Hitachi Interactive Projector, or the projector.

("StarboardSoftware" is not changed).

• The set of functions that are available for the combination of Hitachi

Interactive Projector and Starboard Software is in conformity with the Starboard

FX Portable Series.

• Touch the blinking red part with the pen until it turns to a blinking green during

calibration. For more details on calibration, see the DVD of the StarBoard

Software.

Summary of Contents for CP-AW3019WN















































































































































Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands

Hitachi CP-AW3019WN, Operating Manual

Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands