Hitachi CP-AW3019WN Page 22 Operating Manual Download

Page: 22 / 142

WARNING

►Never look into the projection lens or mirror while

the projection lamp lights, since the projection lamp ray may cause

a trouble on your eyes.

►Be careful not to pinch your finger with the lens door, to prevent an injury.

►Do not place the projector vertically with the lens door open as

shown in the figure on the right. It could cause malfunction or injury.

Tabletop use must be setup with the designated optional accessories.

►Do not stand under the projector mounted on the wall or ceiling,

when its lens door is opening or closing. Moreover, do not look at the

mirror when the lens door is opening or closing.

►Never touch a lens door or mirror. If the mirror is broken, the

projected image will be distorted. Close the lens door, and contact

your dealer.

Power on/off

Summary of Contents for CP-AW3019WN















































































































































Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands

Hitachi CP-AW3019WN, Operating Manual

Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands