12
(continued on next page)
Connecting with your devices (continued)
Setting up
• If you insert a USB storage device, such as a USB memory, into the
USB TYPE
A
port and select the port as the input source, you can view images stored in the
device (
100
)
.
• You can connect a dynamic microphone to the
MIC
port with a 3.5 mm mini-
plug. In that case, the built-in speaker outputs the sound from the microphone,
even while the sound from the projector is output. You can input line level signal
to the
MIC
port from equipment such as wireless microphone. Select HIGH in the
MIC LEVEL item of the AUDIO menu when you input line level audio signal to
the
MIC
port. In the normal mode, the volume of the microphone can be adjusted
separately from the volume of the projector using the menu. (
54
)
In the standby mode, the volume of the microphone is adjustable with the
/-
buttons on the remote control, in synchronization with the volume of
the projector. (
24
)
Even when the sound of projector is set to mute mode by the AUDIO SOURCE
function (
53
)
, the volume of the microphone is adjustable.
In both modes (standby or normal), the
MUTE
button on the remote control
works on the sounds of the microphone and the projector. (
24
)
• If a loud feedback noise is produced from the speaker, move the
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
NOTE
Monitor
R
L
RGB IN
Microphone system
Speakers
(with an amplifier)
