Hitachi CP-AW3019WN Page 130 Operating Manual Download

Page: 130 / 142

130

• When the interior portion has become overheated, for safety purposes,

the projector is automatically shut down, and the indicator lamps may also be

turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.

After the projector has sufficiently cooled down, please make confirmation of the

attachment state of the lamp and lamp cover, and then turn the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Lighting

Orange

Lighting

Red

Lighting

Red

Loading the saved data of CLONING on STANDBY

MODE.

Blinking

Orange

Blinking

Red

Blinking

Red

Loading the saved data of CLONING has failed on

STANDBY MODE.

Please refer to CLONING

(



70 ~ 73

Turned

off

Turned

off

Turned

off

Loading the saved data of CLONING has

succeeded on STANDBY MODE.

Regarding the indicator lamps (continued)

Troubleshooting

Summary of Contents for CP-AW3019WN















































































































































Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands

Hitachi CP-AW3019WN, Operating Manual

Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands