Hitachi CP-AW3019WN Page 125 Operating Manual Download

Page: 125 / 142

125

►Before caring, make sure the power cord is not plugged in,

and then allow the projector to cool sufficiently. The care in a high temperature

state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in

a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

WARNING

►Please take right care of the projector according to the

following. Incorrect care could cause not only an injury but adverse influence

such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual.

►Do not polish or wipe with hard objects.

NOTICE

►Do not directly touch the lens surface with hands.

CAUTION

Other care (continued)

Maintenance

Summary of Contents for CP-AW3019WN















































































































































Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands

Hitachi CP-AW3019WN, Operating Manual

Search results

Summary of Contents for CP-AW3019WN

Reviews:

Related manuals for CP-AW3019WN

Brands by name

Popular brands