Hitachi 42HDT52A Operating Manual Download Page 7 | Manualshive

Page: 7 / 104

background image

300-Ohm Twin Lead Cable

This outdoor antenna cable must be connected to an
antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which
connect to inputs and outputs located on the
television’s rear jack panel and side control panel.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.

S-Video (Super Video) Cable

This cable is used on camcorders, VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.

Optical Cable

This cable is used to connect to an audio amplifier with
an Optical Audio In jack. Use this cable for the best
sound quality.

HDMI Cable

This cable is used to connect your external devices
such as Set-Top-Boxes or DVD players equipped with
an

HDMI

output connection to the TV’s

HDMI

input.

Stereo Cable (3.8mm plug to 3.5mm plug)

Used to connect equipment with mini stereo audio jack
to the left and right audio inputs on the rear and side
panels.

USB Cable

This cable is used to connect your digital camera to the
Photo Input in the side of the Plasma television.

IR Mouse Cable/G-LINK Cable (Provided)

Connect the IR Mouse to the IR Blaster output of your
Plasma Television when A/V Network is used. You
must place the IR Mouse in front of the corresponding
IR window of your cable box and VCR. This
connection allows your TV, and the TV Guide On
Screen

TM

system, to control your cable box and/or VCR.

Power Swivel Cable (Provided with 42” Models)

This cable is used to connect the swivel stand to the
rear panel of the Plasma Television.

IEEE1394 Cable

This cable is used to connect your digital television to
external digital devices.This cable will carry both the
video and audio information.

Sub-Woofer Cable

Used to connect the Sub-Woofer Out to the Sub-
Woofer Input of an audio amplifeier (not included).

7

Hook-up Cables and Connectors

First time use

Most video/audio connections between components can be made with shielded video and audio cables that have
phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be
purchased from most stores that sell audio/video products. Below are illustrations and names of common
connectors. Before purchasing any cables, be sure of the output and input connector types required by the
various components and the length of each cable.

AUDIO OUT
3.8mm
STEREO
MINI-PLUG

2
RCA TYPE
PLUGS

«
...
5
6
7
8
9
...
»

Summary of Contents for 42HDT52A









































































































Reviews:

No comments

Related manuals for 42HDT52A

MultiSync X431BT

Brand: NEC Pages: 3

MultiSync X461UNV

Brand: NEC Pages: 42

Brand: NEC Pages: 2

Brand: NEC Pages: 2

Brand: NEC Pages: 20

60XM5 - PlasmaSync - 60" Plasma Panel

Brand: NEC Pages: 48

MultiSync LCD4020

Brand: NEC Pages: 2

PlasmaSync 42VR5

Brand: NEC Pages: 11

Brand: janitza Pages: 30

Brand: Jamr Technology Pages: 24

Brand: Vicon Pages: 24

Brand: I-Inc Pages: 20

Brand: Swann Pages: 2

Brand: switel Pages: 44

MediaMaster I05

Brand: JL Audio Pages: 43

Reference Premiere RP-160M

Brand: Klipsch Pages: 68

Brand: Rice Lake Pages: 24

Brand: Kardioline Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands