Hitachi 42HDT52A Operating Manual Download Page 64

Page: 64 / 104

Reminder Notification Banner

Depending on your option settings, a notification
banner will appear at the scheduled reminder time.

Press the SELECT button to hide the Reminder banner,
or, if more than one reminder appears, use the
CURSOR PAD

to highlight a program. Press the

SELECT button to tune to the program.

If no choice is made within 3 minutes, the banner
closes automatically.

Remind Conflict

A remind conflict message will appear if:

•

A program set with an auto-tune reminder has the
same start time as an existing auto-tune reminder.

•

A program set with an auto-tune reminder overlaps
with a scheduled recording.

Select these options:

•

Auto-Tune anyway – The selected program will
override an existing program set to auto-tune.

•

Proceed, No Auto-Tune – Set the program as a
reminder but do not auto-tune.

•

Don’t set this reminder – Cancels the reminder.

SETUP:

The SETUP Service screen allows you to modify
settings that were entered at initial TV Guide On Screen
system setup (see page 49). The 3 settings will be the
following:

•

Change System settings

•

Change channel display

•

Change default options

Press the INFO button while the SETUP Service is
highlighted on the Service Bar to display a Help screen.

Use the CURSOR PAD

to highlight a setting option,

and then press the SELECT button to access each
setting.

TV Guide On Screen

On-Scr

een Display

Press SELECT to see current settings or update:
-- ZIP or Postal Code
-- cable or antenna setup
-- recording device

Summary of Contents for 42HDT52A









































































































Search results

Summary of Contents for 42HDT52A

Reviews:

Related manuals for 42HDT52A

Brands by name

Popular brands

Hitachi 42HDT52A, Operating Manual

Search results

Summary of Contents for 42HDT52A

Reviews:

Related manuals for 42HDT52A

Brands by name

Popular brands