Hitachi 42HDT52A, Operating Manual

Page: 51 / 104

Screen 10:
The TV Guide On Screen system will test the code
of your Cable box. No TV, Cable or remote buttons
should be pressed while performing the automatic
test. After the testing process is complete, the
setup procedure will continue, see screen 11.
Screen 11:
Did your Cable box tune to channel 28?
Use the CURSOR PAD
and to highlight your
choice, then press the SELECT button to continue.
If YES: Please see screen 12.
If NO: Select NO to test a different code or select
TEST THIS CODE AGAIN to test the same code.
Screen 12:
Do you have an antenna connected? Use the
CURSOR PAD
and to highlight your choice,
then press the SELECT button to continue.
NOTE: In order to receive the program listings, you
must select YES in this screen if you chose
NO in Screen 3.
Screen 13:
Please confirm your initial settings. Use the
CURSOR PAD
and to highlight your choice,
then press the SELECT button to continue.
If YES, FINISH SETUP PROCESS: Please see
screen 14.
If NO, REPEAT SETUP PROCESS: Please see
screen 1.
Screen 14:
The Basic TV Guide On Screen system setup has
just been completed. Press the SELECT button to
continue.
Screen 15:
Would like the TV Guide On-Screen system to
control the recording of your VCR?
Use the CURSOR PAD
and to highlight your
choice, then press the SELECT button to continue.
If YES: Please see Screen 16.
If NO: Please see Screen 21.
51
TV Guide On Screen
On-Scr
een Display