Hirschmann MACH 1020, User Manual

Page: 48 / 64

48
Installation MACH1000
Release 02 03/2013
Applies to software release 06.0.00 and higher:
If the manual setting is active on the signal contact, then the error display
is independent of the setting of the signal contact.

Port state
The green and yellow LEDs at the individual port display port-related
information. During the boot phase, these LEDs are used to display the
status of the boot procedure.
2.3 Basic set-up
The IP parameters must be entered when the device is installed for the first
time. The device provides 6 options for configuring IP addresses:
 Entry via V.24 connection

Entry using the HiDiscovery protocol via the application HiDiscovery or
Industrial HiVision
 Configuration via BOOTP

Configuration via DHCP
 Configuration via DHCP Option 82

Auto Configuration Adapter
Further information on the basic settings of the device can be found in the
“Basic Configuration” user manual on the CD/DVD.

Default settings

IP address: The device looks for the IP address using DHCP
 Password for management:
Login: user; password: public (read only)
Login: admin; password: private (read and write)
LED Display Color Activity Meaning
R1 Signal contact 1 Yellow Lights up The signal contact is open.
None The signal contact is closed.
R2 Signal contact 2 Yellow Lights up The signal contact is open.
None The signal contact is closed.
LS - data, link status (one green/yellow LED or one green and one yellow LED)
Not glowing No valid connection.
Glowing green Valid connection.
Flashing green (1 time a period) Port is switched to stand-by.
Flashing green (3 times a
period)
Port is switched off.
Flashing yellow Data reception.