Hirschmann MACH 1020, User Manual

Page: 40 / 64

40
Installation MACH1000
Release 02 03/2013
Figure 16: Mounting in the switch cabinet

Fasten the device by screwing the brackets to the switch cabinet.
Note: When operating the device in environments with strong vibrations,
the device can be fastened with two additional brackets at the back of the
switch cabinet
(see on page 59 “Accessories”) , not included in the
delivery.

Vertical mounting on the wall

Use the pre-mounted brackets included in the delivery as shown in the
following figure
(see fig. 17) .

Attach two additional brackets to the device (see on page 59
“Accessories”, not included in the delivery) as shown in the following
figure
(see fig. 17) .

Fasten the device by screwing the brackets to the wall.
WARNING
FIRE HAZARD
Install the device in a fire protected shell if you are mounting it vertically.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
USB V.24
MACH 1000
P
StandBy RM
FAULT
R1 R2
MACH 1000