Hirschmann MACH 1020, User Manual

Page: 12 / 64

12
Installation MACH1000
Release 02 03/2013

National and international safety regulations

Make sure that the electrical installation meets local or nationally
applicable safety regulations.

CE marking
The labeled devices comply with the regulations contained in the following
European directive(s):
2004/108/EG (EMV)
Directive of the European Parliament and the council for standardizing the
regulations of member states with regard to electromagnetic
compatibility.
2006/95/EC
Directive of the European Parliament and the council for standardizing the
regulations of member states with regard to electrical equipment to be
used within specific voltage ranges.
2011/65/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
The product can be used in the industrial sector.
 Interference immunity: EN 61000-6-2

Emitted interference: EN 55022
 Reliability: EN 60950-1
Warning! This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
Note: The assembly guidelines provided in these instructions must be
strictly adhered to in order to observe the EMC threshold values.