manualshive.com logo in svg

HIOS HSV-10RB, Instruction Manual, Page: 31 / 36

Share
Download
HIOS HSV-10RB Instruction Manual Download Page 31

  - 30 -

Trouble

Cause

Corrective measures

9-12
The escaper does not rotate when no 
screws are present, although the indicator 
light is on.

・

Undesired objects blocking front screw   

sensor.

・

Adjustment of the front screw sensors

  is unsuitable.

・

Make sure there are no debris or other

 objects present in the sensor brackets.

・

If the escaper or stopper is damaged

   or worn-off, parts replacement is
   recommended.

・

Adjustment on front screw sensors 

   as shown on P.20

9-13
The escaper rotates in the wrong direction.

・

When the escaper is operating, some 

alien object is preventing the escaper

 

 from rotating smoothly. 

・

Escaper and the escaper guide do not 

   fit together.

・

While the screw lotates, please check 

whether it has hit the holding plate.

・

If the escaper or escaper guide is

  damaged or worn off, replacement is
  recommended.

9-14
.The escaper continues to 
 rotate in the wrong direction.

・

The origin sensor may be improperly

  adjusted. 

・

Shake the screw down through the hole 

at the bottom of the machine.

Summary of Contents for HSV-10RB





































Reviews:

No comments