Hioki TS2400 Instruction Manual Download Page 17

Page: 17 / 116

Parts Names and Functions

2.1 Model SF2400 WPT Testing Software

License key

The license key is inserted into the USB port of the PC.

Only when it is inserted, the stage and measuring instrument control is enabled.

Serial number

Serial number is tagged to the license key.

The serial number consists of 9 digits.

The first two (from the left) indicate the year of manufacture, and the

next two indicate the month of manufacture.

Main window

The window display is set.

The measuring instrument and stage control are set.

Items selected here are displayed in the window.

Menu bar

Menu

Explanation

Data File

Save

: Saves the measurement file.

Open

: Opens the measurement file for the data to be checked. Sample measurement data of

the accessories can also be checked. (Sample.csv in the SF2400 folder in the C drive)

System

Not used by the customer.

Version

Displays the version of the application and PLC.

2 Parts Names and Functions

Summary of Contents for TS2400





















































































































Search results

Summary of Contents for TS2400

Reviews:

Related manuals for TS2400

Brands by name

Popular brands

Hioki TS2400, Instruction Manual

Search results

Summary of Contents for TS2400

Reviews:

Related manuals for TS2400

Brands by name

Popular brands