Hioki TS2400, Instruction Manual, Page: 79 / 116

75
Automatic measurement
4
3
Click Subsequence Editor.
4
Click Init Sequence , Sub Sequence 1 ,
Sub Sequence 2 , and End Sequence and
select items.
Reference: “Sub-sequence item list” (p. 75)
5
Set the standby time and interval.
(When the standby or interval measurement is
selected in step
2
)
6
Click Close .
Sub-sequence item list
Item Explanation Detail setting item
Wait Stands by for the specified time. Wait
Measure Imports data. –
Start Interval Imports data at the specified intervals.
Interval
End Interval
Ends interval measurement.
Init Sequence Executes the items set in Subsequence Editor .
–
Sub Sequence1
Sub Sequence2
End Sequence
Output1
Turns ON/OFF external output 1 of the external
I/O terminal (71).
Output2
Turns ON/OFF external output 2 of the external
I/O terminal (81).
Work Load Turns ON/OFF the workpiece load of the
external I/O terminal (61).