Hioki TS2400, Instruction Manual

Page: 78 / 116

74
Automatic measurement
Interval measurement
Continuous measurement performed at specified intervals is called “interval measurement”.
The standby time between the start and the completion of interval measurement is set.
Example: Performing continuous measurement at intervals of 1 second for 10 seconds.
Measure-
ment
start
Record Record Record Record Record Record Record Record Record Record
1 sec. 2 sec. 3 sec. 4 sec. 5 sec. 6 sec. 7 sec. 8 sec. 9 sec. 10 sec. Measure-
ment
end
Creating a sub-sequence
Sub-sequence
A sub-sequence is a group of multiple sequences and is used in the main sequence. Four types of sub-
sequences are shown below.
Init Sequence Used at the start of the main sequence.
Sub Sequence 1 Used in the middle of the sequence.
Sub Sequence 2 Used in the middle of the sequence.
End Sequence Used at the end of the main sequence.
Two types of sub-sequences can be saved. The initial and end scripts are also set.
1
Click Auto on the main window.
2
Click Sequence.
The script window (window to set the
measurement order) appears.