Hioki SM7810, Instruction Manual

Page: 22 / 69

4.1 Overview and Features
19
The symbol shown below indicates that the following instructions are specific to
the RS-232C or the GP-IB interface. Instructions without these symbols are for
both the RS-232C and the GP-IB interface.
: GP-IB only
: RS-232C only
Before Use
• Always make use of the connector screws to affix the GP-IB or RS-232C con-
nectors.
• When issuing commands that contain data, make certain that the data is pro-
vided in the specified format.
The instrument provides standard communication functionality in the form of GP-
IB and RS-232C interfaces, both of which can be used to control the instrument
remotely and to transfer data.
• This instrument is designed with reference to the following standard:
Reference standard IEEE 488.1-1987
Communication
(GP-IB/RS-232C Interface)
Chapter 4
Wiring Diagram (p.21)
Connect the Instrument and
Controller with a GP-IB or RS-
232C Interface Cable
Communications Protocol Settings
Enter a GP-IB address. (p.23)
Set the instrument to the same
communications protocol as the
controller
Send the “ RMT ” command. (p.23)
4.1 Overview and Features