Hioki CM4141-50, Instruction Manual

Page: 55 / 108

49
Wireless Communications Function (Z3210 required)
2.8 Wireless Communications Function (Z3210 required)
Installing the Z3210 Wireless Adapter (optional) is required.
Concurrent use of GENNECT Cross and HID function (p. 54) is not available.
Using GENNECT Cross
Enabling the wireless communications function allows you to check and record the measured data of the
instrument, and create measurement reports using your mobile device. For details, see the operation guide
for the GENNECT Cross app (free of charge).
GENNECT Cross special site
https://gennect.net/en/cross/index
• The communication distance is about 10 m with a clear line of sight. The communicable distance may vary
greatly depending on the presence of an obstruction (wall or metallic shielding object) and the distance
between the floor (ground) and instrument. To ensure the stable communication, make sure that the radio
wave intensity is sufficient.
• GENNECT Cross is free of charge. However, the customer is responsible for the cost to download the
application software and connect to the Internet when using the software.
• GENNECT Cross may not operate properly depending on the mobile device.
• The Z3210 uses the 2.4 GHz band wireless technology. When there is a device that uses the same
frequency band such as a wireless LAN (IEEE 802.11.b/g/n) near your mobile device, the communication
may not be established.
HIOKI CM4141C961-00