manualshive.com logo in svg

Hioki CM4141-50, Instruction Manual

Share
Download
Hioki CM4141-50 Instruction Manual Download Page 23

17

Operating Precautions

NOTICE

 

„

Do not drop the magnetic adapter.

 

„

Do not subject the magnetic adapter to mechanical shock.

Doing so could damage the magnetic adapter.

 

„

Do not use the magnetic adapter in locations where it may be 

exposed to rainwater, dust, or condensation.

Doing so could decompose or deteriorate the magnetic adapter. In addition, 

diminished magnetic adhesion cause the instrument to drop, resulting in 

damage to the instrument.

 

„

 Do not bring the magnetic adapter near magnetic storage devices, 

such as floppy disks, magnetic cards, prepaid cards, or magnetized 

tickets.

 

„

Do not bring the magnetic adapter near precision electronic 

equipment, such as computers, TV screens, or electronic wrist 

watches.

Doing so could damage such devices or data stored in them.

HIOKI CM4141C961-00

Summary of Contents for CM4141-50













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands