Hioki CM4141-50 Instruction Manual Download Page 27

Page: 27 / 108

Making Measurements

2.1 Inspection Before Measurement

Check if there is any damage to the instrument occurred during storage or shipping and

verify that instrument operates normally before using it. If you find any damage, contact your

authorized Hioki distributor or reseller.

Check

Inspection details

Check

Inspection details



The battery cover is closed and its screw

has been securely tightened.



There is no damage to the test lead

insulation, and neither the white sheathing

nor metal conductor inside the wire are

exposed.



There is no foreign matter on the

measurement terminals (p. 20).



The instrument is neither damaged nor

cracked.



The test leads are not broken. (p. 41)

or less



No segments are missing.

(All segments appear)

2 Making Measurements

HIOKI CM4141C961-00

Summary of Contents for CM4141-50













































































































Search results

Summary of Contents for CM4141-50

Reviews:

Brands by name

Popular brands

Hioki CM4141-50, Instruction Manual

Search results

Summary of Contents for CM4141-50

Reviews:

Brands by name

Popular brands