246
_____________________________________________________________________
12.3 Settings on the File Screen
______________________________________________________________
Flashing cursor
Flashing cursor
Auto
When saving with the same name, automatically
append a number after the file name.
If the last file was saved with a number appended, the
next save just increments the number.
Example: TEST1, TEST2
OVW
(Overwrite)
When saving with the same name, overwrite the
previous contents of the file.
(5) Specify the channel to save. (for measurement
data)
Move the flashing cursor to the position shown in the
figure below and select channel using the
buttons.
(The channel that has been check marked is saved.)
(6) Select the Same File Name Handling setting (if
same-name saving is desired).
Move the flashing cursor to the position shown in the
figure below and select the Same File Name Handling
setting using the
buttons.
(7) Execute the Save.
After selecting the channel to save, press the
START
button
to execute, or the
STOP
button to abort saving.
