143
_____________________________________________________________________
8.5 Trigger Timing (REC only)
______________________________________________________________
Flashing cursor
Start
Recording starts at the trigger event and stops after
the specified recording length.
Stop
Recording starts when the START button is
pressed and stops at the trigger event.
Start&Stop
Recording starts when the first trigger event
occurs, and stops when the next trigger event
occurs.
NOTE
When the trigger timing is set to
Stop
or
Start & Stop
, measured
waveform data equivalent to the recording length is recorded if
the stop triggering is not generated between the initiation of
measurement and the end of the set recording length.
Trigger mode: SINGLE The measurement end
Trigger mode: REPEAT The measurement starts again. (STOP),
or waits for trigger. (START&STOP)
8.5 Trigger Timing (REC only)
In Recorder function, the moment the trigger occurs, the
time related to the waveform being recorded can be set.
Not only the waveform after the trigger but also the
waveform before the trigger can be recorded.
Procedure
Trigger Screen (REC)
1. Press the
SET
button to display the Trigger Screen.
2. Move the flashing cursor to
Timing
and select the trigger
timing using the
buttons.
