Hioki 3290-10, Instruction Manual

Page: 56 / 152

50
4.2 Selecting the Measurement Parameter
Select the parameter to measure from the following.
• Current
(see page 51)
• Frequency
(see page 51)
• Peak Current
(see page 62)
• Integral
(see page 66)
• Duty
(see page 79)
Current is measured during both integral and duty measurements.
Also, when duty is measured, integral measurement occurs at the
same time.
A current threshold must be set in order to perform duty measure-
ment.
4.2 Selecting the Measurement Parameter
Current
Frequency
Peak current
Duty & Integral
RATE data : duty and operating time
INTEG data : integral and interval mean
values (current)
PEAK data : Peak, maximum and minimum
values
Duty Measurement
RATE data
Integral Measurement
INTEG data
PEAK data
Measurement
Contents
Select Measurement
Parameter
Current Measurement
Frequency Measurement
Peak Measurement
Duty Measurement
Integral Measurement